News

How To Use A Laser Welding Machine

May 23, 2023 Leave a message

The following is a brief introduction to how to use a laser welding machine.
 

1. Prepare the workpiece: Before starting the machine, prepare the workpiece by cleaning it thoroughly and positioning it correctly on the fixture.

 

2. Set the parameters: Set the laser power, pulse width, pulse frequency, and welding speed according to the material being welded.

 

3. Adjust the focus: Adjust the laser beam focus to ensure a stable welding process and accurate welding results.

 

4. Start the machine: Press the start button to start the laser welding process. The machine will automatically carry out the programmed welding process.

 

5. Inspect the weld: Inspect the weld for any defects or inconsistencies and make any necessary adjustments to the parameters before continuing.

 

6. Remove the workpiece: After the welding process is complete, remove the workpiece from the fixture and inspect the weld for quality.

 

7. Shutdown the machine: Turn off the machine and clean the welding area.

 

In conclusion, using a laser welding machine requires proper preparation, parameter setting, and focus adjustment. With careful attention to detail and proper use, a laser welding machine can produce high-quality welds and improve manufacturing efficiency.

Send Inquiry