News

The Difference Between Fiber Laser Marking Machine And Co2 Laser Marking Machine

May 30, 2023 Leave a message

Fiber laser marking machine and CO2 laser marking machine are two popular types of marking machines in the market. Both provide high-quality marking, but they differ in several aspects. In this article, we will discuss the differences between fiber laser marking machine and CO2 laser marking machine in 500 words.

 

Laser Source:

The CO2 laser marking machine uses a gas mixture that includes carbon dioxide as the laser source. On the other hand, the fiber laser marking machine consists of a semiconductor laser source that is pumped through the fiber optics cable, generating high-intensity light.

 

Wavelength:

The wavelength of the CO2 laser marking machine is 10.6 microns, while the wavelength of the fiber laser marking machine ranges between 0.8 to 1.1 microns. This means that the fiber laser marking machine is more precise and has better focus compared to CO2 laser machines.

 

Marking speed:

When it comes to marking speed, the fiber laser marking machine is faster than CO2 laser marking machines. This is because the latter has a larger wavelength and lower energy, which results in slower marking speeds. On the other hand, the fiber laser marking machine has a smaller wavelength and higher energy that enables it to mark at a faster speed.

 

Marking depth:

The CO2 laser marking machine is ideal for deep engraving applications, as its wavelength can penetrate deep into the material. However, the fiber laser marking machine is not suitable for deep engraving, but it can mark more precisely and uniformly on the surface.

 

Materials:

Both types of laser marking machines can mark on a wide range of materials, including metals, plastics, glass, ceramics, and leather. However, fiber laser marking machines are more effective in marking on reflective and transparent materials, which can be a challenge with CO2 laser marking machines.

 

Maintenance:

CO2 laser marking machines require frequent maintenance, especially when the laser tube needs to be replaced. On the other hand, the fiber laser marking machine has a longer lifespan, and maintenance is relatively low due to the absence of mechanical components.

 

Cost:

CO2 laser marking machines have a lower initial cost compared to fiber laser marking machines. However, in the long run, the operating cost of fiber laser marking machines is significantly lower due to their low maintenance and longer lifespan.

 

Conclusion:

In conclusion, both fiber laser marking machine and CO2 laser marking machine have their advantages and disadvantages. The choice depends on the specific marking application, material, and budget. If you need precise and fast marking on a wide range of materials, then the fiber laser marking machine is the best choice. If you require deep engraving on non-reflective materials, then the CO2 laser marking machine is suitable.

Send Inquiry