Daily Maintenance Of Fiber Laser Marking Machine

When this machine is not working, the power supply of the marking machine and the computer should be cut off.
When this machine is not working, cover the field lens lens cover to prevent dust from contaminating the optical lens.
When this machine is working, the circuit is in a high-voltage state, non-professionals, do not repair it when booting, so as to avoid electric shock accidents.
Any failure of this machine should be cut off immediately.
When the equipment is used for a long time, the dust in the air will be adsorbed on the surface of the lower end of the focusing mirror, and the light will reduce the power of the laser and affect the marking effect; Heavy cases cause the optical lens to absorb heat and over-temperature and cause it to burst. When the marking effect is not good, the surface of the focusing lens should be carefully checked for contamination.
If the surface of the focusing mirror is contaminated, the lower surface of the focusing lens should be removed.
Special care should be taken when removing the focusing lens, taking care not to break or fall it; Also, do not touch the focal mirror with your hands or other objects.
The cleaning method is to mix absolute ethanol (analytically pure) and ether (analytically pure) in a ratio of 3:1, invade the mixture with a long-fiber cotton swab or lens paper, gently scrub the surface of the lower end of the focusing lens, and replace the swab or lens paper once on each wiped side.
During the working process of the marking machine, the marking machine shall not be moved to avoid damage to the machine.
Do not cover the stacking or put other items on the marking machine, so as not to affect the heat dissipation effect of the machine.