Resistance welding
It is used to weld thin metal parts, clamp the surface of the welded workpiece through the large current melting electrode between the two electrodes, that is, weld by the workpiece resistance heating. The workpiece is easy to deform, resistance welding is welded through both sides of the joint, and laser welding is only carried out from one side, the electrode used in resistance welding needs to be maintained frequently to remove oxides and metal adhered from the workpiece, laser welding thin metal lap joint does not contact the workpiece, and the beam can also enter the area difficult to weld with conventional welding, and the welding speed is fast.
TIG welding
The use of non-consumable electrodes and shielding gases is commonly used to weld thin workpieces, but the welding speed is slower, and the heat input is much larger than that of laser welding, which is easy to produce deformation.
Plasma arc welding
Similar to argon arc, but its torch produces a compressed arc to improve arc temperature and energy density, it is faster and deeper than argon arc welding, but inferior to laser welding.
Electron beam welding
It relies on a beam of accelerated high-energy density electrons to hit the workpiece, generating huge heat in a small dense accumulation on the surface of the workpiece, forming a "small hole" effect, thereby implementing deep penetration welding. The main disadvantage of electron beam welding is the need for a high vacuum environment to prevent electron scattering, the equipment is complex, the size and shape of the weldment are limited by the vacuum chamber, the quality of the weldment assembly is strict, and non-vacuum electron beam welding can also be implemented, but the focus is not good due to electron scattering and affects the effect. Electron beam welding also has magnetic offset and X-ray problems, because the electrons are charged, will be affected by magnetic field deflection, so the electron beam welding workpiece is required to be demagnetized before welding. X-rays are particularly strong at high pressures and need to protect the operator. Laser welding does not require vacuum chamber and demagnetization of the workpiece before welding, it can be carried out in the atmosphere and there is no X-ray protection problem, so it can be operated online in the production line and can also weld magnetic materials.
Welding method of laser welding machine
Apr 05, 2023
Leave a message
Send Inquiry
