1. Knowledge popularization: strict training and then on-the-job
Education and training of staff operating handheld laser welding machines, so that operators understand the potential risks that may present when operating handheld laser welding equipment, and suspend appropriate laser safety exercises for operators, as well as emergency disposal methods when risks are presented. In addition, the management and use of lasers must be terminated by professional (professional) personnel, and the use of laser machines shall not be opened without training and education. When the machine is delivered to the customer, Flex laser strictly carries out standardized operation training, and pastes the operation requirements in a conspicuous place at the operation site, and the machine needs to operate normally, which needs to be turned on the host enable switch, holding the gun head power switch, and holding the light button three switches to prevent accidental injury. When the machine is delivered to the customer, it is necessary to strictly carry out standardized operation training and paste the operation requirements in a conspicuous place at the operation site.
2. Anti-beam radiation: wear radiation protection glasses and protective clothing
As we all know, the laser of the laser welding machine is excited and released light energy radiation, is a kind of high-intensity light, the laser emitted by the laser source is generally not touched, can not be seen, can be considered no physical harm; However, laser welding machine will cause ionizing radiation and stimulated radiation during the welding process, and this induced radiation has a great impact on the eyes and body. Although the laser beam is very small, operators generally like to stare at the beam of the welding machine, but if you look at the sparks generated by the cut for a long time, it is harmful to the eyes and there will be a tingling sensation. The retina is a very sensitive organ, so in the case of long-term exposure to the light source, the operator must wear a radiation protection glasses.
3. Working environment: strictly abide by health standards
A large amount of ozone and oxide nitrides will be generated during the laser welding process; In particular, the concentration of ozone far exceeds the reference health standard and has a great impact on human health. Therefore, its work site should have a good ventilation device to discharge harmful gases and metal dust. In addition, fire protection equipment such as sand boxes, fire extinguishers, hydrants, buckets, etc. must be available. The distance between flammable materials and welding sites shall not be less than 5m. If the specified distance cannot be met, asbestos board, asbestos cloth, etc. can be properly covered to prevent Mars from falling into flammable materials. The distance between explosive materials and welding shall not be less than 10m.
4. Equipment selection: quality is very important
Handheld laser welding equipment belongs to the high power laser equipment of safety level (class IV). Therefore, when an unknown object enters the optical path, the automatic stop of the laser power is an enforced function. It greatly improves the safety of handheld laser welding equipment. For example, handheld welding heads with target recognition functions, such as handheld welding heads that can be intelligently monitored in real time and warned of faults in time, can reduce potential injuries.
