Knowledge

How to judge the welding effect of laser welding machine?

Apr 15, 2023 Leave a message

First, judge the melting phenomenon in the welding process

Whether the melting phenomenon in the welding process is generated and the strength of the production mainly depends on the time, power density and peak power on the surface of the laser material, and the above parameters can be controlled to use the laser to carry out various welding processes. In laser welding machine welding, beam focus position is one of the key control process parameters, under a certain laser power and welding speed, only the focus is in the best position range, the maximum penetration and the best weld shape can be obtained.

Second, understand the welding method of laser welding machine

There are two main types of commonly used laser welding methods, one is continuous laser welding, which is mainly used for welding and cutting large thick parts, and forms a continuous weld during the welding process; The other is pulsed laser welding, which is mainly used for single-point fixed continuous and book material welding, forming circular welding joints during welding; Generally speaking, the choice of welding materials, the choice of laser welding machine, and the choice of processing table are the main factors affecting the effect of laser welding.

Third, the frequency of laser welding machine selection

Generally, when using laser welding machine, the frequency parameters will be adjusted as much as possible according to the customer's requirements for efficiency. Frequency in the welding efficiency requirements, has a very large role, especially for some precision laser welding machines, will cooperate with the galvanometer plus scanning system, the role of frequency will be greater, how to adjust to the appropriate frequency, this will be a technical problem, but the role of frequency will also be related to other aspects, must have an overall effect to have a perfect welding effect.

4. Monitoring of tensile strength

It is possible to monitor the tensile strength, and it is possible to judge where the problem of the laser welding machine occurs according to the results of the inspection. If there is a problem of poor welding during processing, welding joint virtual welding, etc., this time is not necessarily all problems of the welding machine, it may be that the material is not suitable, and the setting of the laser welding machine waveform is changed to weld again, and then the effect is evaluated.

Send Inquiry